How to Hide and Organize Computer Cables

All the cords are getting in the way of your perfectly designed computer area and orderly space! If numerous cables are dangling across it, your desk may appear unkempt, and there may be a trip risk if any of the cables are hanging. Luckily, there are several choices available for concealing PC cables.

These nine simple techniques can help you conceal your PC cables so no one can see them.

Cable Catch:

Hide cords behind your desk by attaching a cable trap at the rear. Basic wire management solutions are all you need at times. Place cable catches on the back of the furniture if wires are hanging from your PC behind your desk. With a slit running through the middle, these resemble little circles. Stick the catch's flat side to your workstation. The wires should now run the entire length of the desk rather than hanging down by pushing them through the split.

• Furthermore, if your desk is in the center of your room, this is a fantastic solution. On one side of the desk, you will be able to see the cable catch, but not the front where your cables are!

Holes in the Desk:

Inside your desk, drill a hole to conceal cables. You almost certainly have PC cords dangling over the sides of your desk if it is pressed up against a wall. Drill a circular hole in the top of the desk, close to the rear, for a permanent storage solution. To make the hole less obvious, you should do this directly behind the computer. After that, insert the cables through the opening so that they hang beneath the desk. In this manner, the top of your desk will be free of unsightly wire clutter.

• This method can be used in conjunction with a cable management box, wire coverings, or tray.

Compact Cable Protector:

To hide cables, place a flat cord shield along the baseboard or floor. You'll need to run wires to outlets if your desk is in the center of the room. Purchase a long cord protector and place a piece of double-sided tape on the floor. To make the tape lay flat, press the cord protector onto it. Next, insert the cables into the protector until it completely encloses them. If your workstation is pressed up against a wall and you wish to conceal the cables leading to the nearest outlet, this method also functions well.

• Remember that if you place the cord protector in the center of the room, it could present a trip hazard.

Trays for Managing Cables:

Purchase a management tray made of plastic or metal to place beneath your table or desk. The tray is attached to the underside of your desk or table using screws, resembling a long chamber. After that, insert the cables inside the compartment to ensure that it can accommodate them. When seated at the desk, you will not be able to see the wires.

• The management tray retains most of the cords, so you can't see them, but you will still have wires hanging off the ends of it.
• You may also conceal a power strip or surge protector inside your compartment if it's large enough!

Double-sided Tape:

To secure power strips and cords, stick the tape on your desk or furniture. If you are hesitant to fasten a wire management tray onto your desk, apply a small amount of double-sided tape to the power strip's flat side for a less permanent solution. Then, push it under your table or against the back of the desk. If there are any stray cables underneath the desk, you can conceal them by taping extra furniture down.

• If necessary, you can remove the power strip once or twice, but the more times you do this, the less strong the adhesive will be.

Box for Managing Cables:

To conceal a lot of wires, set up the box on the floor beneath your desk. It's simple to locate fashionable cable management boxes that complement the design of your space. Fit your surge protector or power strip inside the box and position it on the floor behind your desk. Feed the cords through the openings at the end of the box.

• For example, you can buy plain white boxes with cork covers or stylish black cable management boxes.

Rubber ties or Zip-ties:

Tie loose wires in a group to make them look less unkempt. Cables from the PC to the storage system will still be dangling there even after you've hidden the majority of them in a tray or box. To tidy them up, the hanging wires should be pinched together and covered with a rubber or plastic zip tie. They will appear better ordered. You can use the double-sided tape method to attach the gathered cables to the back of a desk to conceal them further.

• Purchase cable ties with labels already on them if you're serious about organizing your cords. Then, encircle each wire with the corresponding cable.

Cable Covers:

To group wires in style, wrap them with split tubing or braided sleeving. Hiding all the cables coming from your PC is a difficult task. You can take care of the loose wires once you've put the majority of them away. Consider using a piece of split tubing or a braided sleeving as a more ornamental alternative to a zip tie. The wires should be gathered and positioned in the middle of the tube or sleeving. Subsequently, encircle the cables with the cloth to conceal them and enhance their glossy appearance.

• Velcro strips can be used in place of the sleeves for a straightforward, practical fix. These are simpler to take off fast and reapply when necessary.

Binder Clips:

Combine heavy cables with any office items you may have lying around your house. If you don't like purchasing specific cable management supplies, remove a couple of large binder clips from your desk. Pull the cables protruding from your computer and secure them together. Then, press a binder flush against the back of your desk by pulling back one of the handles. To conceal your cables, attach the binder clip to the desk by hammering a nail into it.

• Tinier binder clips can also be used to collect thin wires. If you clip cables together without fastening the clip to your desk or table; it's perfectly acceptable.
• In addition, wires with 120 volts on the wall can be concealed using power bridges.
• Depending on your electrical regulations, you can drill a hole and bring low-voltage wires through the wall. Decorative faceplates are one option.
• If you prefer not to drill holes in the wall, you can use paintable wire tracks and mount the wires on the sheetrock.

Conclusion:

In conclusion, organizing and concealing computer cords can greatly enhance the appearance and security of your work area. You may hide cables neatly and still be able to access them by using basic tools like desk holes, cable catches, small cable protectors, and management trays. Keeping things organized and tidy can be further improved by using supplies like cable covers, rubber bands, cable management boxes, and double-sided tape. Commonplace objects such as binder clips can function as efficient solutions for managing cables. Whether you go for aesthetic or functional solutions, managing your cable clutter improves the appearance of your office and lowers the chance of accidents.