How to Tint Car Windows

Introduction

A plastic film called window tinting is used for darkening the glass of the car's windows.

Tinting your car windows not only improves its appearance but also reduces sun glare and keeps the interior cooler. It blocks nearly all UV rays and filters out a substantial amount of the sun's infrared radiation.

The darkness of tints is determined by visible light transmittance (VLT), which measures the amount of visible light that can pass through glass. A higher VLT percentage indicates that more visible light can enter through the glass.

Advantages

Keeps the interiors cooled.
Lessens solar glare.
Improves the efficiency of air conditioner
Protects interior surfaces from sun damage.
Security from strangers peeping into your vehicle.
Protecting from infrared and ultraviolet radiation prolongs the lifespan of seats, dashboard pads, and trim.
Cool interiors consume less air conditioning, which saves fuel.
Window tinting can improve the look and attractiveness of your vehicle.
Windows with tints increases privacy.

Types of Tints

There are following types:

Dyed: Generally used for attractiveness and privacy.
Metalized: The presence of metallic particles within enhances its ability to reflect heat and UV radiation.
Hybrid: Blends the greatest qualities of metalized and coloured tint film.
Carbon: ultraviolet and infrared radiation are lowered by carbon and polymeric microlayers.
Ceramic: The best and most cutting-edge tint available in terms of technology.

Apparatus

Window Film
Scraper knives and Razor blades
Towels made of Microfiber
Tint applicator or Spatula
Squeegee made of Silicone
Sharpening knife with Interchangeable blades
Cleaner Suction
Heat Gun.

1. Get the Windows Ready

Take off any adhesives or sticky things that are on the windows.
Use the soapy water to thoroughly wash the windows' exterior and interior.
Clean up with the razor scraper to remove all of the dust and grime.
Wipe the windows with a squeegee and microfibril towel to completely dry the glass.

2. Measure the Tint Film Size

Spray the soapy water over the glass window.
Unroll and apply the tinting over the exterior of the glass, covering the whole surface.
With two to three inches of overlay on the glass, cut the film to a suitable size-almost square.
Spray some water over the film.
Cut the film along the edges through a knife or blade.
Pull the film 1 inch towards the left and cut the left edge.
- Pull the film 1 inch towards the right to cut the right edge.
- After lowering the window by � inch, leave the film by � inch excess at the base and cut the film through the window's top.
- Eliminate any extra film from the corners.
Reorient your film such that it leaves additional space from all sides and fits the window precisely.

3. Put on the Tint Film

Use a squeegee and some soapy water to clean the window.
Remove the top half portion of the release liner that covers the film.
Use fresh water to mist the now-exposed area.
Align and attach the topmost portion of the film to the window.
Then remove the water from the edges.
After rolling up the window, use soapy water to mist the lower portion of the film.
After removing the final portion of the release layer
Remove all the air bubbles and water bubbles from the edges.
To ensure that the film fits curved areas correctly, extend it and eliminate air bubbles and extra water using a heat gun. Avoid getting too near or focusing the heat gun on one area for too long. A film that is overheated may be damaged.
Once done, use a microfiber towel to dry the tint.

Conclusion

In summary, window tinting is a common choice among automobile owners who wish to improve their driving experience. There are several advantages to window tinting, including increased security and privacy as well as defense against UV rays. Additionally, you may create a distinctive style that makes your automobile stand out from the crowd by customizing your tinting. Thus, think about investing expert car window tinting right now if you want to enhance your driving experience.