Difference between RJ11 and RJ12

Both RJ11 and RJ12 are telephone connections, and RJ11 and RJ12 are 6-pin and 8-pin connectors, respectively. In RJ11, only 4 wires are removed in the connector, whereas 6 wires are removed in the connector of RJ12. They serve different purposes, and it is critical to understand which one to utilize for the specific application.

In this article, you will learn the difference between RJ11 and RJ12. But before discussing the differences, you must know about RJ11 and RJ12.

What is RJ11 Connector?

Difference between RJ11 and RJ12

Rj11 is an abbreviation for "Registered Jack 11". A connection jack makes a bridged connection for a single telephone line. The Rj11 connector jack is a non-digital mechanism, and RJ11 is a type of registered jack that is commonly utilized to connect telephone equipment. But, in terms of networking, RJ11 is even utilized to link a computer system to a LAN via the computer's modem.

The RJ11 connector is a 6P4C connector with 6 positions and 4 contacts. As a result, the RJ11 cable has four copper wires linked to the center of the connecter, leaving the remaining two contacts unconnected. As a result, the RJ11 may link two telephone lines and one pair of cables for each.

The RJ11 locks into place with a single locking tab which resembles the RJ-45 but is slightly smaller. However, it can be utilized to construct a LAN, the RJ45 connector is more commonly employed.

What is RJ12 Connector?

Difference between RJ11 and RJ12

Rj12 is an abbreviation for "Registered Jack 12". A connection jack connects a central telephone system to individual telephone lines via a line circuit. It is a male connector that only connects to the Rj12 female jack to form a connection. The Rj12 utilizes a 6P6C connector, and it contains 6 connection slots, all of which are utilized for communication. RJ12 connectors are connected using specialized RJ12 6-flat ribbon standard cables.

This cable is made up of six thin copper cables that send and receive electrical signals. All six copper conductors in this conventional ribbon cable are color labeled, and white, black, red, green, yellow, and blue are the colors. Unlike previous wearing systems, the Rj12 is completely unique and complex.

To make the copper-wearing system functional, the cable technician must place it in the proper order. Since numerous corporate offices needed a centralized telephone network for private usage in the 1980s, the Rj12 connector became popular.

This connector makes it easy to set up a local area network with telephones in the office. Even in this digital time, many organizations still utilize this connector to connect their intercom system. However, both connectors are utilized for telephone lines, some other apps, including keyed telephone systems and PBXs, make use of the additional two connectors.

Key differences between RJ11 Connector and RJ12 Connector

Difference between RJ11 and RJ12

There are various key differences between RJ11 and RJ12. Some main differences between the RJ11 and RJ12 are as follows:

  1. RJ11 is an abbreviation for Registered Jack 11. In contrast, RJ12 is an abbreviation for Registered Jack 12.
  2. For a regular telephone connection, Rj11 typically uses a conventional 6P2C It only requires a 6P4C connector for sending low-voltage electricity to the telephone's indicator lamp. In contrast, the Rj12 connector jack always uses a 6P6C connection.
  3. The RJ11 connector connects two phone lines. In contrast, the RJ12 connector connects three phone lines.
  4. RJ12 is less prevalent than RJ11 since RJ11 is often used in the house for telephone lines and connecting modems. In contrast, RJ12 is only utilized in large corporations for centralized telephone networks.
  5. The use of these two connectors differs slightly. RJ11 connectors have small terminals that might be difficult to crimp and strip. On the other hand, RJ12 connectors feature larger terminals that are easier to access. It makes them more user-friendly, especially for applications that require periodic maintenance and repair. In contrast, the bigger size of the RJ12 connector can make it more difficult to install in tight areas. It can be a serious issue in some situations. Therefore, choose the proper connector based on the project's physical limits.
  6. The RJ11 connector employs a flat telephone cable with four copper wires inside. On the other hand, RJ12 employs a flat telephone line with six copper wires within.
  7. The price of these connectors varies as well, with RJ12 connectors being more expensive than RJ11 connectors. It is due mostly to their larger size and higher performance, as well as their more durable building materials. As a result, before making a decision, it is important to examine the expenses. In contrast, the price disparity has narrowed in recent years as RJ11 connectors have become more popular and less expensive. Depending on the application, either connector may offer good value.
  8. The RJ12 connector is larger in size than the RJ11 connector. It is primarily a result of its additional pins, but it is also due to its larger size and more durable materials. The connector may be more difficult to install due to its added weight and bulk. On the other hand, the RJ11 connector is smaller and lighter, which makes it easier to install. It is also more compact, which makes it ideal for small spaces where its larger sibling would not fit.
  9. The main advantage of the RJ12 connector is its performance. It has two rows of connections and can handle twice as much data as an RJ11 connector, with a high transmission rate of up to 4Mbps. It makes it perfect for applications requiring high-speed data transport, such as Ethernet networks. On the other hand, the RJ11 connector offers a much slower transmission rate of up to 2Mbps. As a result, it is less ideal for networking and communications applications but more than adequate for simple phone lines and dial-up internet connections.

Head-to-head comparison between RJ11 and RJ12

Here, you will learn the head-to-head comparisons between RJ11 and RJ12. The main differences between RJ11 and RJ12 are as follows:

FeaturesRJ11RJ12
Full FormsRJ11 is an abbreviation for Registered Jack 11.RJ12 is an abbreviation for Registered Jack 12.
DefinitionIt is a connector jack that makes a bridged connection for a single telephone line.It is a connecting jack that links a central telephone system to individual telephone lines via a line circuit.
ConnectorIt typically utilizes a conventional 6P2C and 6P4C connector.It usually utilizes a 6P6C connection.
PopularityIt is very popular because it is mostly utilized in phone units.It is less popular because it is rarely utilized but still utilized in some large organizations.
CableRJ11 connector commonly utilized the flat telephone cableIt is commonly utilized as a flatline cord cable.
Performance and SpeedIt has two rows of connections and can handle twice as much data as an RJ11 connector, with a high transmission rate of up to 4Mbps.It offers a much slower transmission rate of up to 2Mbps.
ConnectsIt can connect two telephone lines.It can connect three telephone lines.
UtilizationIt is mainly utilized for connecting modems and telephone lines.It is mainly utilized for connecting Keyed telephone systems, telephone lines, and PBXs.
SizeIt is smaller and lighter in size than the RJ12 connector.It is larger in size.
InstallationIt is more difficult to install due to its added weight and bulk.It is simple and easy to install.
CostRJ11 connectors have become more popular and less expensive.RJ12 connectors are more expensive than RJ11 connectors.

Conclusion

In summary, RJ11 and RJ12 connections are two of the most prevalent jacks used in telecommunications and networking. Although they appear the same, they have significant distinctions affecting their applications. Understanding the distinctions between the two connectors is critical in selecting the best one for your operation.

Choosing a suitable option tailored to your needs is important by knowing their sizes, applications, usability, designs, pin configurations, terminal layouts, performance, and pricing. Having the appropriate connector makes or breaks a successful installation. RJ11 and RJ12 are typical telephone line connectors that use the same six-slot connection, and the main distinction between them is their wiring layout. RJ11 only utilizes 4 of the 6 available slots, but RJ12 uses all six. However, RJ12 is less widespread than RJ11 today since RJ11 can be found in homes connecting modems and telephone lines. In contrast, major corporations only utilize RJ12 to link telephones to the centralized telephone network.






Latest Courses