Javatpoint Logo
Javatpoint Logo



The Redmi A2+ smartphone was introduced on May 19, 2023. The phone's 6.52-inch touchscreen display features a 20:9 aspect ratio and a 1600x720 (HD+) resolution. 3GB of RAM are installed. The Redmi A2+ runs Android 13 and has a 5,000mAh battery.

Regarding cameras, the Redmi A2+ has a camera with 8 megapixels with a f/f2.2 aperture on the back. It includes a single front-facing snapper arrangement with a 5-megapixel sensor and an f/f/2.2 aperture for selfies.

The Redmi A2+ runs Android 13 and features 32GB of storage (expandable to 1024GB). the Redmi A2+ dual-SIM smartphone. The Redmi A2+ measures 164.90 x 76.75 x 9.09mm (width, height, and thickness) and weighs 192 grammes. The first three colours were Black, Light Green, and Light Blue.

Wi-Fi, GPS, Bluetooth v5.0, Micro-USB, & FM radio are among the connectivity options available on the Redmi A2+. The phone has an accelerometer and a fingerprint reader.


Display And Design

The 6.52-inch HD+ display on the Xiaomi Redmi A2 Plus has a touch sampling rate 120Hz. The panel offers a pixel count of 269ppi and a resolution of HD+ of 720x1600px. The display's four hundred nits of brightness ensure good visibility even in harsh sunlight. In addition, the phone's scratch-resistant display increases the phone's longevity for regular usage.


For the A2 series is also, Redmi has carried over the A1's design. The smartphone has an extremely gripping plastic back that has a textured finish. No need to be concerned about dirt or fingerprints adhering to the back. A square notch is made in the two-step camera panel, and in the center is a fingerprint sensor.

The Redmi A2+ differs from the standard Redmi A2 because it has a biometric sensor. The wide lens and depth sensor are housed in the camera cutout. The smartphone's microphone, a small USB (Type-B) port, and a 3.5mm headphone jack are located along the bottom edge. On the upper edge is where the speaker's grille is located. On the opposite edge are the power key and volume rocker, and on the left edge are the SIM & memory card trays.

Although the Redmi A2+ offers reasonable touch sensitivity, the haptic feedback is too strong. While surfing through news feeds and site pages, we were fine. We like using the phone after turning off the haptic feedback. This smartphone has a rapid fingerprint scanner as well.

Performance and Cameras

The Redmi A2+ receives some significant engine enhancements. The smartphone runs Android 13 Go Version out of the box and is powered by a MediaTek Helio G36 SoC. For those unaware, Android's 'Go' series is intended specifically for budget-friendly smartphones without a powerful processor. You only receive a bit of bloatware and all the necessary Android OS functionality. Despite Xiaomi's MIUI being on top, plain Android is considerably more comparable to the entire software experience.

The Redmi A2+ does simple tasks like messaging, surfing social media, audio playback, and moving between various apps, thanks to the MediaTek Helio G36 CPU within. While multitasking, you won't immediately notice a slowdown in speed, but the smartphone has trouble with more demanding tasks. For instance, we had to interrupt media playback when utilizing this smartphone's navigation features.

Even a little amount of playing on this smartphone was tried. Basic video games, including Candy Crush, Royal Match, & Bubble Shooter, ran smoothly on it. Call of Duty Mobile may also be played on a smartphone, but the experience could be better. All beginning smartphones struggle with this, so if you're especially interested in gaming, we suggest opting for a handset in a different category. The Redmi A2+ received 144 points for a single core and 514 points for a multi-core score from the Geekbench 5 app.



If you use it often, a 5,000mAh battery on the Redmi A2+ comfortably lasts all day. If you use this phone more sparingly, you can extend its battery life to two days without any problems. The phone bill may last up to three days if you only text and make phone calls. The smartphone may be fully charged using the 10W power supply in 3 hours. A Type-C USB connector would have greatly up the charging process. It's about time low-cost cell phones began using the new ports.

Audio Quality

With a working external amplifier, the Xiaomi Mi A2's output was flawless regarding quality. However, we can only offer it part points because its volume was below average.

With headphones, the volume isn't any better, but on the plus side, degradation is barely audible. The Mi A2 is unquestionably above average in terms of accuracy in this situation, even though the stereo crosstalk only slightly worsens, and there is a faint intermodulation distortion.


Network Issues

Suppose the Xiaomi Redmi A2 has network problems, such as poor signal quality or a malfunctioning mobile data network. The phone network's ups and downs are also visible.

Several methods that apply to all Android device kinds are provided below.

  • Firstly, take out and reinstall the SIM card in your Redmi A2. However, before removing or installing the SIM card from your Redmi A2, turn down your device first. Because if you don't, your smartphone or SIM card could get damaged.
  • In next option, Switch the Redmi A2's Airplane Mode on and off

There are two methods for turning off and on airplane mode.

  • First, open the "Settings App" on your phone. Next, go down to Connection & Sharing. Here, you will see Airplane Mode.
  • Now Change the Airplane Mode on and off

In another method, you can also rapidly access this mode from the top Notification panel by sliding it down, finding the icon for airplane mode, and clicking it. As you can see, mobile information and Wi-Fi are both turned on; all you have to do now is turn the airplane mode on and off.


Another Solution to "How to Reset the Redmi A2's Network Settings"

  • First, open the Settings app on your phone, then look for and click the Connection & Networking TAB. Reset Bluetooth, mobile networks, and Wi-Fi
  • Finally, tap Reset Settings and click OK to confirm.

Update the Redmi A2 using the most recent version as another solution.

You may check and install a new update to the software if it is available for your Redmi A2 even though you missed it by navigating to Settings About Phone Checking for an operating system update.

The final option is to reset all settings on your Redmi A2.

If the solutions mentioned above do not resolve the issue, you must restart your smartphone once.

  • Make a complete backup before doing a factory reset on your Android device.
  • To reset your device to factory settings, adhere to the procedures below:
  • First, Go to the Settings app on your phone, then find and choose System Advanced.
  • Tap the Reset Options button.
  • Choose to Factory Reset (Erase All Data) Phone reset
  • Finally, click the "Erase Everything" option, and if you've pre-programmed a screen lock password, enter it.

Pros And Cons


  • Affordable Smartphones.
  • Enormous Battery Capacity.
  • For the A2 Plus variant, a rear-mounted fingerprint scanner.
  • There is a specific microSDXC card slot.
  • Available in a variety of colors.
  • MIUI support for Android 12 Go Edition.
  • There is a jack for audio.


  • Need to include the most recent Android 13 OS.
  • Display with a default refresh rate.
  • Inefficient camera setup.
  • Rather bulky in build.
  • A charging port for micro USB 2.0.
  • Not for extensive use.
  • Storage and RAM are both low.
  • Without assistance for reverse charging.

Common Issues Faced and Solutions

1. Battery Drain Problem: The battery on the Xiaomi Redmi A2+ is depleting more quickly than it should.

  • Check your settings: Verify the optimal screen luminosity, data, and background app settings.
  • Restarting your device can frequently resolve momentary software problems.
  • Refresh your software: Make sure the software on your phone is current.

Your Xiaomi Redmi A2+ is heating up, especially when you use it vigorously.


  • Limit resource-demanding applications: Applications that consume a lot of your phone's resources might raise the temperature of your phone.
  • Assure enough ventilation: Always keep your phone exposed, especially when using or charging heavy apps.
  • Software upgrades can assist in solving overheating issues.

2. The issue with Software Bugs: The Xiaomi Redmi A2+ has several software bugs and issues.

  • Restarting your device can frequently resolve momentary software problems.
  • Clear cache: Some issues can be resolved by clearing the temporary files of the troubled apps.
  • Make sure your mobile device and apps are updated by updating your OS.

3. Your Xiaomi Redmi A2+ device's performance is deteriorating over time.

Resolution: Exit background programs. Your phone may become unresponsive if there are too many background apps active.

  • Storage space must be available because a nearly full space can affect performance.
  • Refresh your software: Performance upgrades are frequently included in routine updates.

4. Connectivity and Networking Problems

Problem: On your Xiaomi Redmi A2+, Wi-Fi, Bluetooth, & mobile data connectivity are not working properly.


  • Examine your settings: Ensure the network and connection settings are set up properly.
  • Restarting your device can frequently resolve momentary connectivity problems.
  • Refresh your software: Fixes for connectivity problems could be included in updates.


For a budget phone, the Redmi A2+ performs admirably. It excels at doing typical daily duties, and its 6.5-inch LCD screen is perfect for watching videos and movies. In excellent lighting, the 8MP shooter on this phone performs admirably. This phone's battery backup was excellent, and I would suggest it to anyone who travels regularly. The Redmi A2+ could also be a good burner phone because of its 2-day battery life.

Youtube For Videos Join Our Youtube Channel: Join Now


Help Others, Please Share

facebook twitter pinterest

Learn Latest Tutorials


Trending Technologies

B.Tech / MCA